Plate Nº 79 · recorded November 16, 2026

PhysicsReported finding

Eleven Frames Across 100,000-Fold Time Range: New Camera Method Films Ultrafast Events

University of Tokyo researchers used 11 tunable frames spanning a 100,000-fold time range to capture ultrafast events in a single shot, from femtoseconds to nanoseconds.

By Nathan Brooks3 min read666 words

In brief

  1. The technique captures an event using 11 frames spanning five orders of magnitude in time — a 100,000-fold range.
  2. Frame timing is adjustable across femtoseconds (quadrillionths of a second) to nanoseconds (billionths of a second).
  3. Keiichi Nakagawa's team at the University of Tokyo published the method in Optica on 19 October 2026 (DOI: 10.1364/OPTICA.610944).
  4. The timing control uses band-resolved individual delay generation (BRIDGE) built into the STAMP imaging technique.
  5. Funding came from JST grant JPMJAX22K8 and MEXT grant JPMXS0118067246.
Scientists Unlock a New Way To Photograph Events That Vanish in Trillionths of a Second
Plate Nº 79Scientists Unlock a New Way To Photograph Events That Vanish in Trillionths of a Second — FreeCreativeStuff / pixabay

Eleven frames, spread across a 100,000-fold range of time, can now capture one ultrafast event from start to finish. Researchers at the University of Tokyo developed the method, called logarithmic ultrafast photography, and published their results in the journal Optica on 19 October 2026.

The approach solves a practical problem. Ultrafast events — laser pulses, shock waves, plasma dynamics — begin on one timescale and evolve on another. Conventional imaging captures frames at evenly spaced intervals on microsecond (millionth of a second) or millisecond (thousandth of a second) timescales. With a limited number of frames, that uniform spacing forces a trade-off: you either record one brief stage in detail, or the broader process, but rarely both.

What does the new technique actually change?

The team, led by Keiichi Nakagawa, an associate professor in the University of Tokyo's Department of Bioengineering, gave researchers direct control over where each frame falls in time. Instead of snapping pictures at regular intervals, the method concentrates frames around the moments when characteristic changes occur.

"We wanted to find a way to connect these very different timescales in a single measurement," said Keitaro Shimada, a postdoctoral researcher in the Nakagawa Group and lead author of the study. "In other words, we wanted to see both the first instance and what follows, without having to choose one or the other."

The researchers built the approach on an existing technique called sequentially timed all-optical mapping photography, or STAMP, which pairs ultrafast imaging with high image quality. To control the timing, they added a component called band-resolved individual delay generation, or BRIDGE. In plain terms, BRIDGE slices light into wavelength bands — portions of the light spectrum — in sequence, and each band's timing can be adjusted independently. Every band stays linked to one specific instant in the recorded process.

How fast is fast here?

That control lets frames land at chosen moments on timescales ranging from femtoseconds (quadrillionths of a second) to nanoseconds (billionths of a second). To put that span in perspective: a femtosecond is to a second what a second is to about 31.7 million years. The technique spans five orders of magnitude in time — the 100,000-fold range — within a single recording.

The team's report also describes the setup as equivalent to an exposure of roughly 260 frames per second, though the paper does not explain the basis for that comparison, so treat the figure with some caution.

Why does one shot matter so much?

The real payoff comes with events you can't rerun identically. Many ultrafast phenomena — a shock wave passing through a material, a laser ablating a surface — never unfold the same way twice. Reconstructing a full sequence from separate experiments can hide relationships between early and later stages.

"We are particularly interested in phenomena that are difficult to reproduce exactly," said Nakagawa, a co-author and principal investigator of the study. "In those cases, recording the early and later stages of the same event can reveal relationships that might be lost when a sequence is reconstructed from separate experiments."

The researchers' targets include short-lived phenomena whose peaks are hard to catch, plus connections between phases of physical processes that have stayed invisible because they play out on different timescales. They propose applications in:

  • laser processing
  • material dynamics
  • plasma and shock-wave research
  • biomedical applications

What are the limits?

This is a single proof-of-concept study, published 19 October 2026 in Optica (DOI: 10.1364/OPTICA.610944), and the paper leaves some questions open — including how the frames-per-second equivalence was calculated. Still, the core idea is concrete: a fixed budget of 11 frames, placed by hand at the moments that matter, can bridge the beginning and the aftermath of an event that lasts, in total, less than a blink of a billionth of a second.

Funding came from the Japan Science and Technology Agency (grant JPMJAX22K8) and Japan's Ministry of Education, Culture, Sports, Science and Technology (JPMXS0118067246).

via google.com (Original)

Filed under

  • ultrafast-imaging
  • stamp
  • bridge
  • femtosecond-to-nanosecond-timescales
  • plasma-dynamics
Share this article:

More from Nathan Brooks

Nathan Brooks

Show full bio

Market editor covering companies, deals and strategy in general science news at SciBeat.

387 articles

Nearby plates

« Previous article