Plate Nº 24 · recorded November 16, 2026

PhysicsReported finding

Millimeter-wave qubit readout limits state changes at 99.2% fidelity

A 34.670 GHz aluminum cavity reads a 3.083 GHz superconducting qubit with 99.2% fidelity in 780 nanoseconds, while simulations indicate fewer unwanted transitions.

By Priya Raman5 min read923 words

In brief

  1. Readout fidelity reached 99.2% with 109 readout photons.
  2. The readout completed in 780 nanoseconds.
  3. A 3.083 GHz transmon was coupled to a 34.670 GHz aluminum cavity.
  4. The readout-to-qubit frequency ratio exceeded 10.
  5. The study was published in Physical Review Letters in 2026.
Reading superconducting qubits while suppressing unwanted state transitions
Plate Nº 24Reading superconducting qubits while suppressing unwanted state transitions — analogicus / pixabay

By Priya Raman

A 34.670 GHz aluminum cavity enabled a 3.083 GHz superconducting qubit readout with 99.2% fidelity in 780 nanoseconds, while suppressing most unwanted state transitions.

At the U.S. National Institute of Standards and Technology in Boulder, Colorado, Akash V. Dixit and colleagues built the device. The Colorado-based team included a member based in Canada, and the study examined how millimeter-wave photons interact with conventional transmon qubits during readout. The researchers published their results in Physical Review Letters.

The cavity worked with millimeter-wave photons, electromagnetic waves in the millimeter-wavelength range, at a frequency near 35 GHz. That frequency stood far above conventional readout hardware and allowed the cavity to measure the qubit with less disturbance.

Why does qubit readout matter?

An artificial-intelligence system recently proved the 18-year-old Aaronson–Ambainis conjecture, a long-standing educated guess in computer science. The proof eliminates one proposed route to enormous quantum speedups and rules out one particular variant of quantum supremacy. That term means a programmable quantum computer solving a problem that no classical computer can solve in feasible time.

Scott Aaronson of the University of Texas at Austin said: “It doesn't undermine any form of quantum supremacy that we did conjecture to exist!” The result therefore leaves the broader promise of quantum computing intact, although the technology remains difficult to realize. Reading qubits poses a particular problem because measurement itself can change the state researchers seek to observe.

A qubit is the quantum-mechanical counterpart of a binary bit, which can hold only 0 or 1. A qubit can occupy more than one state at once and uses those simultaneous states during a calculation, but a measurement yields one of two states, |0> or |1>. A readout resonator determines which state has appeared.

Conventional readout often disturbs the original state, especially during repeated measurements. The new design targets that problem through a high-frequency coupling between the qubit and its readout cavity.

How does the device read a qubit?

A readout resonator is a microwave cavity, usually a metal enclosure that traps microwaves. At certain frequencies, and depending on the cavity's shape, those microwaves form standing waves, meaning waves that reinforce one another and store electromagnetic energy.

The cavity's resonant frequency shifts when the qubit moves between its ground and excited states. Researchers can therefore infer the qubit state from the cavity response. This method works with transmons, the most widely used type of superconducting qubit.

A transmon pairs a Josephson junction, a nonlinear superconducting connection, with a large parallel capacitor called a shunting capacitor. This combination makes the device unusually insensitive to electrical charge noise.

Conventional transmons operate at 3 to 6 GHz, and their readout resonators operate at 6 to 10 GHz. The new setup instead coupled a 3.083 GHz transmon to a 34.670 GHz aluminum cavity, producing a readout-to-qubit frequency ratio greater than 10.

Using 109 photons for readout, the system achieved 99.2% fidelity, a measure of how closely the reported state matches the true one, and completed the measurement in 780 nanoseconds. Measuring the cavity frequency supplied the qubit-state information.

Rather than lowering the qubit frequency, the design raises the readout frequency. That choice preserves the unequal spacing of energy levels, or anharmonicity, needed for gates that change a qubit's state quickly. It also allows minimal residual thermal population, meaning very few excitations left by thermal energy.

Why does a higher frequency protect the state?

The group used Floquet simulations to explain why the frequency separation works. Floquet theory is a branch of ordinary differential equations, which describe continuous rates of change, for analyzing systems under regular periodic pulses. Its method captures responses that strengthen with each pulse, much as pushing a child on a swing strengthens the swing's motion.

At millimeter-scale frequencies, the simulations showed that the cavity drive mostly avoided transitions between states inside the transmon's Josephson potential well, an energy region in which the qubit state resides. They attribute this suppression to the large separation between the cavity-drive and qubit frequencies.

“Because the drive-induced state transitions are suppressed,” the researchers wrote, “we are able to perform a high-fidelity qubit readout using more than 100 photons.” The experiment used 109 photons, consistent with that statement.

They also say the coupling paves the way for further advances in circuit QED, the study of interactions between light and matter in quantum circuits.

What could the new coupling enable?

Researchers foresee three possible applications for this coupling:

  • Dark-matter searches: The resonator could aid experiments looking for dark matter, hypothetical matter whose presence researchers infer from its effects.
  • Ultrastrong-light experiments: The coupling could support QED circuits in which unusually strong light interacts with matter.
  • Hybrid quantum systems: The authors say the coupling may become central to systems that combine circuit optomechanics, or electromagnetic circuits coupled to mechanical motion; Rydberg atoms, or atoms with highly excited outer electrons; and other superconducting qubits.

The authors present these wider uses as possibilities, not demonstrated outcomes of the present experiment. The reported advance concerns one transmon-cavity coupling, and Floquet simulations explain the transition suppression. The dark-matter and hybrid-system applications therefore remain prospective.

The results appear under the title “Millimeter Wave Readout of a Superconducting Qubit,” by Akash V. Dixit and colleagues, in Physical Review Letters in 2026. The DOI is 10.1103/c84y-ggqs, and the preprint is available at arxiv.org/abs/2603.13837.

via phys.org/rss-feed/ (Source)

Filed under

  • quantum-computing
  • superconducting-qubits
  • quantum-readout
  • millimeter-waves
  • circuit-qed
Share this article:

More from Priya Raman

Priya Raman

Show full bio

Senior reporter covering people, launches and day-to-day practice in general science news at SciBeat.

425 articles

Nearby plates

« Previous article