Plate Nº 39 · recorded November 18, 2026

Chemistry & MaterialsReported finding

Harvard Team Hits 91% Yield With Battery Molecules in Clean Chemistry

Harvard chemists hit 91% yield by using flow-battery phenazine molecules to shuttle charge across an oil-water boundary, replacing hydrogen gas and metal catalysts.

By Nathan Brooks4 min read815 words

In brief

  1. Continuous-flow system achieved a 91% yield, published in Nature Catalysis (2026).
  2. Conventional hydrogen production emits 10-12 kg CO2-equivalent per kg of hydrogen.
  3. Phenazines originally developed for grid-scale flow batteries serve as recyclable charge shuttles.
  4. Reaction rate depends on interfacial adsorption density, not the shuttle's reducing power.
  5. Commercialization proceeds via Harvard spinoff Adiabatic Materials.
Repurposed battery molecules drive key chemical reactions where oil meets water
Plate Nº 39Repurposed battery molecules drive key chemical reactions where oil meets water — PublicDomainPictures / pixabay

A Harvard team has achieved a 91% yield in continuous-flow chemical production using electricity and molecules originally designed for grid-scale batteries. The study, published in Nature Catalysis in 2026, replaces heat, heavy-metal catalysts and hazardous hydrogen gas with a metal-free process that runs at the boundary where oil and water meet.

The target transformation is nitro reduction—converting a nitro group into a primary amine. It's one of the most common steps in chemical manufacturing, underpinning active pharmaceutical ingredients, agrochemicals, dyes and other materials.

Why the conventional process is a problem

Industry typically performs nitro reduction with hydrogen gas produced by steam methane reforming. That production route emits roughly 10 to 12 kilograms of carbon dioxide equivalent per kilogram of hydrogen—so for every kilogram of hydrogen consumed, the atmosphere absorbs the weight of a full office water cooler bottle in CO2-equivalent emissions.

Alternative methods lean on single-use reducing agents, which generate substantial waste. Electrification looks cleaner, but it hits a physical wall: saltwater conducts electricity well yet can't dissolve organic compounds, while organic solvents dissolve reactants easily but conduct electricity poorly.

How do battery molecules fix this?

The team, led by Richard Liu, associate professor in Harvard's Department of Chemistry and Chemical Biology, and Michael Aziz, Gene and Tracy Sykes Professor at the Harvard John A. Paulson School of Engineering and Applied Sciences, repurposed ultrastable water-soluble phenazines. These compounds were originally developed for flow batteries, and here they act as chemical shuttles.

In the setup, phenazines sit in saltwater inside an electrochemical cell, where electricity charges them with protons and electrons. Pumping that solution into a reactor alongside an organic solvent holding the target compound creates a two-phase mixture. At the interface, the phenazine hands off its charge via proton-coupled electron transfer—PCET, meaning protons and electrons move together—then returns to the water to recharge.

"A lot of people doing organic electrochemistry are trying to pass these currents through relatively nonconductive organic solvents," Liu said. "We thought, if this worked, it could really help address that problem, because you could do the electrical part in water, the thermochemical part in organic solvent, and then have the magic happen at the boundary."

Lead author Abdulrahman Alfaraidi, a doctoral student co-advised by Liu and Aziz, spotted the crossover. "Battery engineering and organic chemistry—these two fields do not really normally talk to each other very much," he said. "A big part of this work was realizing that the design rules developed in one field can be used to solve problems in the other."

Precision without the collateral damage

The phenazine shuttle targets with what the researchers call surgical precision. Traditional catalysts can destroy double bonds, alkynes or halogen rings; this method leaves them intact. And because the phenazine stays in the water layer while the product stays in the organic layer, target compounds separate cleanly.

Liu offered a kitchen analogy: "It's like a vinaigrette—you can shake it up to do the reaction, but then as it flows over these internal barriers, it will separate out into two streams, one of which you want to recycle back into the cell."

Working with CCB Assistant Professor Joonho Lee's group, the team combined kinetic analysis, surface science and quantum chemical modeling to confirm that proton and electron motion are tightly coupled during the rate-determining step. Counterintuitively, reaction rates didn't track the shuttle's reducing power. They tracked its interfacial adsorption density—how strongly the molecule prefers hanging out at the oil-water border.

What about commercial viability?

Beyond the 91% continuous-flow yield, the team's economic analysis found the process depends heavily on mediator cost and durability. Alfaraidi, whose background is in chemical engineering, said he was "always thinking beyond whether the reaction works—whether the mediator is durable and whether the overall process can actually be viable."

The platform is now being commercialized through Adiabatic Materials, a Harvard spinoff co-founded by Aziz, Liu and SEAS Assistant Professor Zachary Schiffer. The goal: secure, green domestic supply chains for key pharmaceutical starting materials.

Liu admits the commercial turn surprised him. "When I came to Harvard, I would have bet you money that I would never be involved in anything of commercial interest," he said. "But it turns out, organic chemistry is such a central science that it can have unexpected impacts in ways that I could not foresee."

The findings are preliminary in industrial terms—lab-scale demonstrations don't guarantee plant-scale economics. But the 91% figure and the durability analysis suggest battery chemistry and pharmaceutical manufacturing may have more to say to each other than either field expected.

The paper is Abdulrahman M. Alfaraidi et al., "Aqueous phenazine catholytes mediate efficient hydrogenation at an aqueous–organic interface," Nature Catalysis (2026), DOI: 10.1038/s41929-026-01625-5.

via phys.org/rss-feed/ (Source)

Filed under

  • electrochemistry
  • green-chemistry
  • nitro-reduction
  • flow-chemistry
  • pharmaceutical-manufacturing
Share this article:

More from Nathan Brooks

Nathan Brooks

Show full bio

Market editor covering companies, deals and strategy in general science news at SciBeat.

456 articles

Nearby plates

« Previous article