Plate Nº 68 · recorded November 17, 2026

Chemistry & MaterialsReported finding

MIT Team Builds Stronger Materials by Copying Nature's Disorder

MIT and Northeastern engineers replaced perfectly ordered metamaterials with nature-inspired, disorderly beam networks — and the messy designs beat ordered lattices in impact and compression tests, per a new Nature study.

By James Calloway4 min read824 words

In brief

  1. A Nature study introduces 'scale-rich metamaterials' that outperform ordered designs in impact and compression tests
  2. Samples were credit-card-sized squares, 3D-printed in polymer, with internal beams spanning microns to centimeters
  3. The design algorithm is controlled by just two parameters: initial line thickness and how fast it thins
  4. The research was supported in part by the U.S. National Science Foundation's DMREF program
Inspired by networks found in nature, engineers design stronger, more resilient “metamaterials”
Plate Nº 68Inspired by networks found in nature, engineers design stronger, more resilient “metamaterials” — blickpixel / pixabay

By James Calloway

Engineers at MIT and Northeastern University have built materials that survive impacts better than conventional designs — by abandoning the perfect order that has defined their field. Their open-access study appears in the journal Nature.

The researchers call their creations "scale-rich metamaterials." Metamaterials, in plain terms, are materials whose internal architecture — not their chemistry — gives them unusual abilities. Since the field's beginnings, engineers have designed them from a single building block, a "unit cell," copied and pasted thousands of times into precise, repeating patterns like honeycombs.

The new work breaks that habit. Instead of repeating one cell, the team built materials from tiny support beams of many different sizes, sprawling and intersecting like the veins in a dragonfly's wing, a leaf's vasculature, or connections in a social network.

And when the physical tests came, the messy designs won.

What did the tests actually show?

The team 3D-printed polymer samples, each a square roughly the size of a credit card, with internal beams ranging from microns to centimeters across. They dropped weights on them. They squeezed them with increasing force. They ran the same tests on conventional lattice and honeycomb metamaterials for comparison.

The network-inspired samples resisted compression and sudden impacts better than the ordered ones. They also cushioned a fragile object embedded at their center — in one demonstration modeled on the density-graded rind of a pomelo, with denser beams at the edges protecting the core.

"This is a completely new way of thinking for metamaterials," says study author Carlos Portela, associate professor of mechanical engineering at MIT. "Unlocking this network design for materials really frees us to think of new microstructures and mechanical benefits that haven't been possible before."

Why does disorder help?

Here's the mechanism, and it's intuitive once you see the flaw in the old approach. Ordered metamaterials are strong until something goes wrong. If a periodic material is punctured or cracked, the surrounding identical cells deform in kind, and the whole structure buckles fast.

"We've spent years looking at periodic and ordered microstructures, and we've learned there are a lot of limitations and non-ideal responses, such as this localization effect," Portela says.

The networked materials spread the damage instead. "Because there is such a richness of length scales in these networked materials, if one part fails, there is a strong web of structures around it that keeps the entire material from failing catastrophically," Portela says. "It's more efficient at distributing damage and absorbing energy."

How do you design one?

The team's algorithm starts with a random point inside a domain the size of the intended material. It draws a line through that point at a random angle, crossing the whole space. Then another point, another line — this one stopping when it hits a boundary or the first line. The process repeats, drawing progressively shorter, thinner lines, until a dense web of beams of varying sizes fills the space.

Just two knobs control the outcome: the thickness of the starting line, and how quickly that thickness shrinks with each new line. Tune those two parameters, the team found through simulations and experiments, and you tune the material's stiffness across a wide, controllable range.

"We see we can really tune the stiffness of a material just by changing these two parameters, which dictate how these network patterns get generated," Portela says.

The collaboration draws on network science — the study of nodes and their connections, long used to describe the internet, neurons, food webs and financial markets. Co-author Albert-László Barabási, a professor of physics at Northeastern and a leading figure in the field, asked whether network science could build a physical material with properties nature doesn't offer. One catch: unlike the internet, a physical material has real constraints — beam counts, thicknesses, spacing — so the algorithm had to respect them.

What does this change for everyday products?

The procedure could guide impact-absorbing helmets and armor, the researchers say, plus acoustic lenses — microstructured materials that focus sound or vibration. Tian "Tim" Chen, an associate professor at Imperial College London who was not involved, calls it "a design framework for materials whose features vary over a very wide range," possibly leading to "a next generation of materials with unprecedented physical behavior."

Hold the applause for a moment, though. These are credit-card-sized polymer samples in lab tests, not certified helmets. No fatigue data, no long-term durability numbers, no manufacturing cost analysis appear in the announcement. The path from algorithm to product is long, and the study itself is a first step.

The study's co-authors include Andrew Yen-Jong Chen, Mohammad Charara and Jayna Wadhwa of MIT; Csaba Both, Ting-Ting Gao and Albert-László Barabási of Northeastern; and Niek Mooij of Utrecht University in the Netherlands. The U.S. National Science Foundation's DMREF program supported the work in part.

via doi.org (Original)

Filed under

  • metamaterials
  • impact-resistant-materials
  • network-science
  • 3d-printing
  • materials-science
Share this article:

More from James Calloway

James Calloway

Show full bio

Staff writer covering regulation, policy and their impact on general science news at SciBeat.

473 articles

Nearby plates

« Previous articleNext article »