Plate Nº 91 · recorded November 17, 2026

Space & AstronomyReported finding

Spacecraft Can Navigate by Shadows Using Only Solar Panel Data

A preprint shows lunar spacecraft can fix their position within 15 seconds using eclipse data from solar panels — no radio, cameras or new hardware required.

By Elena Vasquez4 min read791 words

In brief

  1. Eclipse timing from solar panel voltage pinned CAPSTONE's shadow crossing to within 15 seconds.
  2. CAPSTONE's panel voltage fell from 23 V to near zero, then recovered to 31 V, on Jan. 11, 2026.
  3. Eclipse data alone cut simulated position uncertainty by more than 60% after a missed check-in.
  4. The method draws on 22,000 crater eclipse observations made between 1842 and 2011.
  5. The system needs no new hardware — 'zero size, weight and power' in spacecraft terms.
Navigating lunar orbit using nothing but shadows and a power meter
Plate Nº 91Navigating lunar orbit using nothing but shadows and a power meter — adege / pixabay

By Elena Vasquez

A spacecraft flying near the moon can pinpoint its own position to within 15 seconds of shadow entry and exit using nothing but its solar panel voltage readings. That's the headline result of a new preprint paper by Ian Down of Advanced Space, James McElreath of Space Exploration Engineering and Manoranjan Majhi of Texas A&M, posted on arXiv, which proposes a zero-cost fix for a growing deep-space traffic problem.

The problem is real. NASA's Deep Space Network (DSN), the workhorse system for tracking spacecraft beyond Earth orbit for decades, is drowning in requests as mission counts climb. Some recently launched missions are already getting harder to track. The new paper offers a workaround that costs nothing: use the data a spacecraft already collects about its own solar panels during an eclipse.

How do solar panels become a navigation tool?

Every solar-powered spacecraft already tracks its panel output, typically through a technique called maximum power point tracking, or MPPT — an algorithm that tweaks the panels' electrical operating point to squeeze out the most power. An eclipse interrupts that output when a body such as the moon or Earth passes between the spacecraft and the sun.

Engineers usually dodge eclipses on purpose. They drain batteries and chill the whole spacecraft. But the precise timing of those blackouts carries valuable information.

Astronomers know the exact positions of the sun, Earth and the moon years in advance, thanks to planetary maps built from decades of data. They also know the shapes and locations of the shadows Earth and the moon cast into space. Each shadow has two nested cones: the penumbra, where the sun is partly blocked, and the umbra, where it's fully cut off.

When a spacecraft crosses into one of those cones, solar radiation hitting its panels drops sharply while onboard batteries keep the electronics running. By recording the exact timestamps when voltage starts falling and when it recovers after the craft exits the shadow, a navigation algorithm can work out the spacecraft's three-dimensional location — no cameras, star trackers or radio signals needed.

Simple in theory. Harder in practice.

Why are shadows so hard to read?

The moon has no atmosphere, so its shadow is jagged, tracing the mountains and craters on the surface. Each of those surface features can shift eclipse timing by a few seconds.

Earth is messier still. The planet is slightly squashed at the poles, and its atmosphere can blur the sun and enlarge its shadow. That makes it hard to tell exactly which part of the planet a spacecraft is passing over at any moment.

The researchers attacked the Earth-shadow problem with an unusual data set: more than 22,000 historical observations of lunar craters being covered by Earth's shadow, collected by astronomers between 1842 and 2011. Those records let the algorithm map parts of Earth's shadow to specific ground features, giving a sharper picture of where a spacecraft sits during its eclipse.

Did it work on real flight data?

Yes. The team tested the method on telemetry from CAPSTONE, a CubeSat mission operated by Advanced Space, the lead author's employer. CAPSTONE was designed to test the orbit for NASA's now-discontinued Lunar Gateway and completed its mission in July 2026.

On Jan. 11, 2026, CAPSTONE passed through the moon's shadow. Its solar panel voltage dropped from 23 volts to near zero, then climbed back to 31 volts when sunlight returned. From those readings alone, the researchers estimated the spacecraft's shadow entry and exit to within 15 seconds of its actual passage.

They also ran a simulation of a worst case: a spacecraft misses a check-in with ground stations and its position uncertainty balloons by several kilometers. Processing eclipse data alone, with no other information, cut that uncertainty by more than 60 percent.

What doesn't it do?

The method doesn't replace ground-based radio tracking. It's a safety net. And in spacecraft jargon, it's "zero size, weight and power" — zero-SWaP — meaning it needs no new hardware whatsoever, just software reading data the spacecraft already gathers.

As more spacecraft venture beyond low Earth orbit and keep overwhelming active tracking systems, that free safety net could prove genuinely valuable.

One caveat: the results come from a preprint, not yet peer-reviewed, and they rest on a single real eclipse event from one CubeSat. More flight data will be needed before anyone relies on this for operational navigation. Still, the core idea — shadows as a free map — has passed its first real-world test.

Publication details: Ian M. Down et al., "Eclipse Observables for Navigation in Cislunar Space," arXiv (2026). DOI: 10.48550/arxiv.2610.28669

via phys.org/rss-feed/ (Source)

Filed under

  • spacecraft-navigation
  • solar-panels
  • cislunar-space
  • lunar-shadow
  • capstone
Share this article:

More from Elena Vasquez

Elena Vasquez

Show full bio

Correspondent covering money, funding and market shifts around general science news at SciBeat.

503 articles

Nearby plates

« Previous articleNext article »