Plate Nº 80 · recorded October 30, 2026
PhysicsReported finding
Laser-Shaped Light Switches Magnetism 1,000 Times Faster Than Drives
UC San Diego engineers used a reshaped ultrafast laser to switch magnetic states 1,000x faster than conventional methods, breaking a long-standing three-layer thickness barrier in optical memory.
By Marcus Bennett4 min read845 words
In brief
- UC San Diego engineers demonstrated optical switching potentially more than 1,000 times faster than conventional magnetic methods.
- The team switched magnetism in a nine-layer platinum-cobalt structure, breaking the previous three-layer thickness limit.
- The process, published in Nature Communications on October 27, 2026, works without requiring a particular light polarization.
- The researchers aim to shrink the laser beam further, to just a few hundred nanometers.
- The specialized ultrafast laser is not yet easily integrated into computer chips, a major practical obstacle.

A precisely shaped laser beam has switched magnetic states in a material more than 1,000 times faster than conventional magnetic methods, according to engineers at the University of California San Diego. The team published its results on October 27, 2026, in the journal Nature Communications.
For memory engineers, the headline is density as much as speed: the same technique writes data onto regions far smaller than earlier optical experiments could reach, which could eventually shrink storage devices while cutting their energy use.
What does the finding change?
Modern hard drives store digital information as 1s and 0s in tiny magnetic regions. Writing new data normally requires an external magnetic field to flip the orientation of those regions. That process consumes considerable energy and caps how quickly data can be recorded.
The UC San Diego team demonstrated an alternative called optical switching: using light, rather than a magnetic field, to change magnetic states. Light delivers energy in extremely short bursts and focuses onto remarkably small areas, so it can write magnetic information faster and with less power. According to the researchers, optical switching could run more than 1,000 times faster than methods that depend on external magnetic fields.
"The smaller the size of the beam, the smaller and more dense the optical memory," said senior author Abdoulaye Ndao, a professor in the Department of Electrical and Computer Engineering at the UC San Diego Jacobs School of Engineering.
How did they break the three-layer barrier?
Until now, optical switching faced two hard restrictions. Earlier experiments worked only on extremely thin magnetic structures with no more than three magnetic layers, and they required light with a particular polarization — meaning the electromagnetic waves had to be oriented one specific way.
The thickness limit mattered. "Past experiments had found that increasing the material's thickness beyond three layers suppressed optical switching," Ndao said. "That put a constraint on the overall thickness of the magnetic material and thus, its ability to retain memory in the long term." Thicker structures help preserve stored information over extended periods, so the ceiling capped the technology's usefulness.
Ndao's group removed both obstacles by reshaping and shrinking an ultrafast laser beam. They demonstrated optical switching in a substantially thicker structure made of nine alternating layers of platinum and cobalt, and the process worked without requiring any particular light polarization. The new beam is dramatically smaller than those used in earlier work — the researchers describe a reduction of tens of orders of magnitude.
"We've optically engineered the light to change the physics that's happening in the material at the micro- and nanoscale," said first author Muhammad Waleed Khalid, an electrical and computer engineering Ph.D. student in Ndao's group.
What is the mechanism?
The technique concentrates laser energy into an extremely small region and fires a sequence of ultrafast pulses. The first pulses briefly heat a localized patch of the magnetic material, causing a small region to reverse its magnetic orientation. Additional pulses gradually enlarge that reversed region until the new magnetic state becomes stable.
This controlled sequence let the researchers manipulate magnetism in ways conventional laser beams had not achieved. "Working with a specialized laser allowed us to optically engineer the beam to have a certain shape and size," Khalid said. "That gave us the room to explore more fundamental physics, which cannot be done with conventional beam lasers."
Why did verification take so long?
The results departed so far from earlier experiments that the team needed extensive repeated testing before the optics community accepted them. "The effects we were seeing were so new and unusual that we had a difficult time convincing others in the field that our discovery was not a one-time fluke. We spent a lot of time and effort repeating and verifying our experiments to substantiate our work," Khalid said.
The work paired two specialties that rarely intersect. Ndao's optics team collaborated with Eric Fullerton, an expert in thin-film magnetic materials who holds the Endowed Chair Professorship at UC San Diego's Center for Memory and Recording Research. Rather than designing a new magnetic material, the team changed how light interacts with an existing one. "Instead of designing a new material to enable optical switching, we redesigned the light itself and showed new properties that were not previously thought to be possible," Ndao said.
What stands between the lab and your laptop?
The results are preliminary in engineering terms, and the researchers flag the obstacles plainly. The specialized ultrafast laser used in the experiments does not integrate easily into computer chips. The team is now searching for magnetic materials that respond to laser systems better suited to electronic hardware, and it aims to shrink the beam further to just a few hundred nanometers using optical structures that concentrate light into progressively smaller regions.
If those challenges yield, the approach could enable a generation of compact, high-density memory devices that write digital information far faster than today's hardware — but that outcome remains an open engineering question, not a scheduled product.
via dx.doi.org (Original)
More from Marcus Bennett
Show full bio
News editor covering regulation, policy and their impact on general science news at SciBeat.
493 articles
Nearby plates
- Edinburgh Team Cuts Magnetic Memory Energy Use by Orders of Magnitude
- Tiny Nanolaser Could Cut Computer Energy Use in Half
- Caltech Chip Steers Light in 74 Femtoseconds Using Light Alone
- Cornell chip-based laser cooling speeds trapped-ion quantum computers
- Spinning Light Pattern Measures Laser Frequency in a Single Image